ALMACO Single Plant Belt Thresher: Belt Setups, Power Options and Frames

 

Not every plot, plant or sample justifies running a combine. The ALMACO Single Plant Belt Thresher gives research stations, breeders and seed labs a way to thresh individual plants or small samples cleanly, without a full-size harvester.

In the video above, Sean from Seedburo walks through how the thresher works and the three choices you make when you set one up: belts, power and frame. Seedburo has been a long-standing ALMACO distributor, and this guide sums up what he covers.

How Does a Single Plant Belt Thresher Work?

The thresher uses two belts. You feed the plant in between them, and the belts rub the seed free from its husk or chaff and away from the stalk.

The belts can run at the same speed, in different directions, or with different belt surfaces top and bottom. That flexibility is what lets one machine handle very different crops.

What Crops Can You Thresh?

Anything where the seed is attached to a plant or stalk, or held in a husk or seed coat. Common examples include:

  • Wheat
  • Soybeans
  • Oats
  • Cannabis

Choosing Your Setup

1. Belt Configuration

Belt setup is the biggest factor in how the thresher performs, and it should be matched to the crops you plan to harvest. There are three belt types (Chevron, Mini Cleat Lock and Smooth) and six available configurations:

Upper Belt Lower Belt
Chevron Chevron
Mini Cleat Lock Mini Cleat Lock
Smooth Smooth
Smooth Mini Cleat Lock
Smooth Chevron
Chevron Mini Cleat Lock

Not sure which belts fit your crop? Call Seedburo at 312-738-3700. Tell us what you're harvesting and we'll help you pick the right configuration.

2. Power Option

  • Electric (standard): 3/4 HP motor, 115V, 60 Hz. Plugs into a standard 110V outlet.
  • Gas (upgrade): 3 HP engine for locations without power.
  • Diesel (upgrade): 4.2 HP engine for remote sites where diesel is easier to get than gas.

3. Frame

  • Axle and tongue frame: tow the thresher behind a vehicle to remote plots.
  • Stationary stand: a fixed setup for the lab, shop or barn.
  • Stationary stand with casters: roll it where you need it inside your facility.

Frequently Asked Questions

What is a single plant belt thresher used for?
It threshes individual plants or small samples by rubbing the seed free between two belts. It's used in place of a combine or harvester for research plots, breeding programs and seed samples.

Who makes the Single Plant Belt Thresher?
ALMACO manufactures it. Seedburo Equipment Company is a long-standing ALMACO distributor.

How many belt configurations are available?
Six, using combinations of Chevron, Mini Cleat Lock and Smooth belts on the upper and lower positions.

Does it need electrical power?
The standard 3/4 HP electric motor runs on a normal 115V outlet. If you're working without power, you can upgrade to a 3 HP gas engine or a 4.2 HP diesel engine.

Can I take it to the field?
Yes. With the axle and tongue frame, you can tow it behind a vehicle to remote locations.

Questions About the Single Plant Belt Thresher?

Our team can help you match belts, power and frame to your crops and location.

📞 800) 284-5779

🌐 Shop the Single Plant Belt Thresher

For more than 100 years, Seedburo has supplied trusted equipment for grain inspection, seed testing and agricultural research.

 

Back to blog