Welcome to our new site. If you have any issues checking out please use our chat feature below.

Vac-A-Sample Pneumatic Sampling Systems

Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems
Vac-A-Sample Pneumatic Sampling Systems

SKU: Q71P1401
Shipping calculated at checkout.
Quantity must be 1 or more

Vac-A-Sample Instruction Manual

Vac-A-Sample® Pneumatic Sampling Systems

A Fast and Easy Way To Sample and Maintain Quality
Be sure your grain is free from insect infestation, mold growth, moisture
pockets and uncertain aeration.
 

Sampling

The Vac-A-Sample lets you know the condition of your grain from top to bottom, up to 60 ft. deep. Two men can easily make six or seven 60-foot probes in the span of a working day. The Vac-A-Sample eliminates unnecessary shifting and turning of stored grain, shortens the sampling time, fumigating time and the handling hours.

Not only can the Vac-A-Sample be used in grain, but all kinds of dry, free-flowing
materials. The cyclone is engineered to exhaust air as it deposits the sample from the “core”. A continuous sample is fed into the cyclone collector through a flexible neoprene hose attached to the probe. As the air flow is moving downward it creates a vacuum, “lifting” the sample upward, forcing the probe further into the mass.

The probe itself is a series of sections of inner and outer tubes. The chamber formed between these two tubes allows air to pass downward to the tip of the probe where the pneumatic action takes place. 

Fumigation

The Vac-A-Sample is also an effective instrument for distributing insecticides. When hot spots occur, due to insect infestation or moisture accumulation, treatment is made easy by inserting the Vac-A-Sample into the suspected area and pouring the insecticide or dropping the insecticide tablets into the probe. This application should be made with either the burr tip section or with no tip section at all. The type of infestation, the size and specific location of the hot spot can be determined by successive probes. Treatment can then be made locally, eliminating the need for treating the entire bin or having to move the grain.

For a complete system you will need: A base unit, hose, lever yoke, gooseneck connector, pliers, a tip section and various probe sections based upon the depth you need to probe.

Estimated Ship wt/dims: Carton 1 (with cyclone only): 54 lbs, 18" (L) x 18" x (W) x 48" (H). Carton 2 (with accessories of up to 10 probe sections, lever yoke, pliers, gooseneck, one tip section and 50 ft. hose): 58 lbs, 49" (L) x 17" (W) x 17" (H). These are estimates only. This will vary depending upon which accessories you choose.

 

Works With

  • Barley Fine Tip
  • Bulgar
  • Canola
  • Corn Coarse Tip
  • Corn Meal
  • Cottonseed
  • Dry Beans
  • Farro
  • Kasha
  • Lentils
  • Millet
  • Milo Fine Tip
  • Mustard Seed
  • Oats
  • Quinoa
  • Rice Fine Tip
  • Soybeans Coarse Tip
  • Soybean Meal
  • Spelt
  • Wheat Fine Tip
  • Wheat Berries
  • Wheat Gluten
  • Wild Rice

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods