Welcome to our new site. Please contact us if you run into any issues. Contact Us
SKU: 901D-10/B
SKU: 901D-10S/B
SKU: 901D-7/B
SKU: 901T-10/B
SKU: 901T-10S/B
SKU: 901T-7/B
SKU: 901D-10/C
SKU: 901D-10S/C
SKU: 901D-7/C
SKU: 901T-10/C
SKU: 901T-10S/C
SKU: 901T-7/C
SKU: 901-PRINTER
Couldn't load pickup availability
Loading...
Total items: 0
Product subtotal: $0.00
The Seedburo 901 Series Count-A-Pak® dual-chute seed counter and single-chute seed totalizers have all of the same technology as the new 901 Carousel Seed Counter; with a touch panel display, fiber optic counting module and updated communication capabilities. The 901 can count seeds as small as 1mm and as large as 18mm. The 901 has two USB ports to connect a paper printer or barcode label printer. You can also interface with a USB bar code scanner. The unit has Wi-Fi, and wired Ethernet to pass data to a computer or to monitor counting data remotely. The 901 can be programmed to count to a programmed value and stop or a total count. You can also program the number of bags and the count for each bag with a product ID and lot code for 100 different seeds variety.The standard 901 has two operating modes, the total count of a lot and a Batch count of a lot. You can program the 901 to count a set amount into one bag from 1-999,999. The accuracy is ±1 at 1000 or .1%. The 901 dual chute model is also equipped with a bag detection sensor so you do not spill precious seed. The 901 totalizer seed counter is essentially a batch totalizer, but there are three operating modes which may be selected for the 901 dual chute model. Net wt: 45 lbs., Actual dims: 16.1" (L) x 15.6" (W) x 16" (H), Ship wt: 50 lbs., Ship dims: 18" (L) x 18" (L) x 16" (H).
Adjusting the track width slide to accommodate various seed types and sizes:
The slide guide is held with two Nylon set screws. They can be loosened so you can pull the slide guide in or out. Increasing or decreasing the width of the guide to the Chute. The slide guid should be adjusted for the width of the seed you are counting. Therefore if two rows of seed are coming into the chute one seed will fall back in the bowl. For accurate counting you must have a single row of seeds feeding into the Optic counter assembly.